EPS 3D CNC Cutting Machine

EPS 3D CNC Shape Cutting Machine Main Features 1.The machine makes use of controlling the X-axis and the Y-axis to combine them into a graph. At the same time, the resistance wire is used to cut all kinds of EPS products. Its operation route is to make use of the graphics inputted into the computer, and automatically sends impulse signals to control the X and Y axes.When the machine is equipped with a rotation device, the 3D (three- dimensional) can be realized; 2.Two methods: to directly use AutoCAD to draw or to scan the graphics and then input them into the computer; 3.The Single-Wire CNC Shape Cutting Machine is applicable to cutting products with big volumes or in small numbers 4.The Multiple-Wire CNC Shape Cutting Machine is applicable to cutting products with small volumes or in large quantities. The Resistance Wire Cutting System can use 20 resistance wires at the same time, after inputting the graphics into the computer all the resistance wires can run in parallel, and can cut 20 complicated 3D (three- dimensional) shapes per each cutting. Technical Data No. ItemsType\ UnitEPSCNC3-2000x1240EPSCNC3-3000x3000EPSCNC3-4000x40001Max. Products Sizemm2000x1240x12403000x3000x12404000x4000X12402Hot Cutting Wire Lengthmm2000300040002Min. Cutting Thicknessmm0-12400-12400-12403Cutting Speedm/min0-3.50-3.50-3.5Frequency-Conversion TimmingFrequency-Conversion TimmingFrequency-Conversion Timming4Number of Operating Hot Wire SimultaneouslyPiece1-201-201-205Hot Wire Specificationmm0.4-0.80.4-0.80.4-0.86Power Supplykw2.252.253.07Transformer Capacitykw8889Control Modeautomaticautomaticautomatic10Control SystemAutoCADAutoCADAutoCAD11Cutting ModeThree DimensionThree DimensionThree Dimension128Max. Contour Sizemm2500x2000x25003500x3500x25004500x4500x250013Machine Net Weightkg150020002500