EPS Automatic Continuous Block Cutting Machine

Main Features of EPS Automatic Continuous Block Cutting Machine(EPS Machine,EPS Machinery) 1.The machine uses the PLC (Programmable Logic Controller) and Touch Screen, to achieve the automatic positioning and continuous moving of the EPS Panel, the machine controls the motor to drive the transmission chain, at the same time making use of the resistance wires to cut out the required EPS Sheets. 2.The machine uses the Horizontal and Vertical Cutting Wires to achieve the 3D (Three-Dimensional) Cutting of the EPS Blocks; 3.The machine has a specially made 10KVA Transformer with multiple sockets, to which the Horizontal Cutting frame can use 60 electric hot wires at the same time, the Vertical Cutting frame can use 20 electric hot wires at the same time. The Transformer has a large capacity, at the same time can smoothly regulate the voltage by using the voltage regulator; 4.The machine uses the Frequency-Speed Regulator that makes the speed regulation convenient, stable frequency, and to smoothly cut the EPS Blocks of stable dimensions; 5.The efficiency of this machine is 3 5 times as that of the ordinary Cutting Machine; 6.Customer can optionally selected the machine for automatically collecting and crushing the side-scraps. Technical Data No.ItemsType\ UnitEPSBC4000/LEPSBC5000/LEPSBC6000/L1Max. Products Sizemm4050508060802Min. Cutting Thicknessmm1010103Cutting Speedm/min0-4.50-4.50-4.5Frequency Conversion to TimingFrequency Conversion to TimmingFrequency Conversion to Timming4Number of Operating Hot Wire SimultaneouslyPiece5050505Hot Wire Specificationmm0.4-0.80.4-0.80.4-0.86Motor Power Supplykw3840457Transformer Capacitykw3636368Max. Contour Sizemm25000X1600X240029000X1600X240034000X1600X24009Machine Net Weightkg240028003200